Customized Design XFJG-100CN Paper Tube Making Machine
|Material||S304 stainless steel|
|Thickness of winding paper tube||2-8mm|
|Voltage||Current state preparation voltage|
1. With the length of the wire cut set by the microcomputer, the
more accurate touch screen is convenient to adjust the data.
2.Use the man-machine interface operation, the operation is more
3.For paper holder, the paper disc electric lifting device put the
cut paper on the paper rack for easy operation.
4. Select a single or double-sided adhesive system.
5.The spiral tube, the operation panel suspended, special operating
system, belt tightening device (hand wheel drive).
6.Infrared control single knife on line cutting tube.
1. Automatic cutting and automatic tube dropping, automatic
stopping function of paper breaking and paper breaking.
3, automatic transmission automatically recovery when cutting;
4, computer PLC control, with remote control port;
5, multi-point operation panel or digital remote control function,
operation is very convenient.
6, the circular knife active cutting, the incision is more stable,
the performance is more stable.
7, more than 80 function settings, arbitrary setting machine
8, stainless steel rubber basin, poly grease knife, high carbon
steel knife. Durable.
9, automatic glue.
Classification of paper tube machines
The paper tube machine can be divided into spiral tube rolling
machine, flat roll paper tube machine and pagoda type paper tube
machine according to the technological process of paper tube.
According to different uses, paper tube machines can be divided
into: pipe cutting machine, rolling machine, sealing machine and
precision cutting machine.
According to the degree of intelligence, paper tube machine can be
divided into: intelligent numerical control spiral paper tube
machine and program controlled spiral paper tube machine.
Intelligent embodiment of paper tube machine
It has self-locking function and can automatically lock without
shaking when the swing arm angle is adjusted.
With automatic cutting device, the incision is neat without warping
angle, and the length of cutting battalion can be adjusted
automatically. One or two people operate.
A parallel spiral paper tube machine, which is suitable for the
internal diameter and wall thickness, which is suitable for the
quantity and width of paper tape. (the 38 type is especially
suitable for making small inner diameter, thin wall paper tube).
Adopting the three active stepless speed drive roller wheel, the
belt is not slippery, the core axis is small, the belt pressure is
big, the winding force is strong, the power transfer efficiency is
high, the paper tube strength is good, and the appearance is
Application of paper pipe machine in packaging industry
At present, the attention degree of the beverage industry to the
sterile cold filling production line has reached a new height, and
the use of aseptic cold filling equipment has become an inevitable
trend in the beverage production enterprises.
The investment cost of the sterile cold filling production line has
always been the concern of the beverage industry. As the equipment
suppliers continue to reduce the cost of equipment, the investment
cost of the paper tube machine in the sterile cold filling
production line has been reduced to 1.5 to 1.6 times as much as the
hot filling line, and the supplier of the sterile cold filling line
of the domestic paper tube machine is not The break is ripe.
The paper machine is the core equipment in the production line. The
rapid conversion of filling equipment has aroused widespread
concern of enterprises. Because when the production of different
products or different bottle type products, the filling equipment
will lose precious filling time and reduce production efficiency
because of the conversion of paper pipe equipment.
The development of paper tube machine
The world, the world of things, the existence of everything is not
the same, the paper tube machine industry in our country is no
exception, or progress, or backward, then how to improve the
development of this industry? This has become a common concern of
paper tube machine manufacturers.
Now, the paper tube machine, the reel paper cutting machine, the
pipe cutting machine, the paper tube machine equipment are updated
and replaced by the first push in Japan, which has made a large
amount of dollars in this field. The four small dragons in
Southeast Asia also step in Japan, and have a little performance in
the manufacturing of packaging machinery and production lines; in
the European community, the pace of renewal and replacement of
packaging machinery and production lines in Italy is much faster
than that of other member countries.
So where are they progressed? Update is the key!
The replacement method is to replace the local zero, parts or key
components and key technologies, so as to achieve the purpose of
replacing a unit, so that the production capacity, performance,
efficiency, model and assembly mode of the original packaging
machinery equipment or production line are updated. In this way,
most parts and unit parts are reused, not only to improve the value
of equipment, but also to save the raw material and a large number
of labor, and reduce the cost.
The development trend shows that the paper tube packaging
equipment, paper tube machine, roll paper cutting machine, pipe
cutting machine, paper pipe machine equipment and spiral paper tube
machine are becoming more and more standardized, serialized,
integrated, assembled and online. Civilian and military high
technology will also enter the field of packaging machinery and
equipment more and more widely. Fierce competition in the market
will undoubtedly accelerate the upgrading of paper tube packaging
equipment in all walks of life and the pace of technological
Operation principle of paper tube machine under different control
1. From the working mode of the paper tube machine, in the relay
control circuit, when the power is connected, all the relays in the
circuit are in the condition that the relay is absorbed
simultaneously. The relay that does not should be absorbed by some
conditions and cannot be absorbed. This mode of work is called the
parallel working mode. And the PLC user program is executed in a
certain order, so the soft relay is in the periodic cycle scanning
and connecting. The action order of each relay, which is restricted
by the same condition, is determined by the sequence of the program
scanning, which is called the serial working mode. 2. From the
control method of the paper tube machine, the control logic of the
electrical control system adopts the hardware connection, and the
control logic is combined by the series or parallel connection of
the relay's mechanical contact. And PLC uses computer technology,
its control logic is stored in the memory in the way of program. To
change control logic only needs to change the program, so it is
easy to change or increase the function of the system.